Krauss Maffei Rimstar Compac 4/4 Metering Machine '13

Like New! Only 10,347 Shots

2-15 Gallon Day Tanks
Max. Pressure/Effect Cap: 150 PSI
Double Jacket: Max 75 PSI, Max 250 deg. F
Material: Carbon Steel, Plasite Coated on Inside
Lid: Carbon Steel, Plasite Coated Interior
Temperature Probe: PT 100

Plate and Frame Heat Exchanger 8 Liter/Min Isocyanate
Mounted in Return Line, Gaskets: EPDM
Plates: 316L Stainless Steel, Frame: Carbon Steel
Max Pressure: 150 PSI (Chemical and Glycol/Water)
Capacity basedon 8 Liter/Min 300 cps, 1.20 G

Heat Exchanger Integration Package including:
Bypass Check vale, Ball Valve, Gate Valve, Misc. Fittings

Basic Compact 4/4 with Magnetic Coupling
Base Frame RIM- Star Compact For Mixing Head
Hydraulic, 2-Pumps Supports, 2-Raw Material Tanks and Control Desk, Dimensions (LxW) ca: 3600 x 2200mm

Set of Drip Plates for series Ristar Compact:
For a Basic Frame with two Pump Metering streams
and volumetric flow from 8 to 40 L/min.

Mixing Head Control Block:
for MK 5/8 ULKP- 2KVV Mixing Heads includes
2-Control Valves, Pressure Relief Valve (Clearing Piston), Pressure Accumulator, Pressure Display &
Shut Off Valves

2 Suction Line 21/Min with Edge Filter (manually cleanable)
Gap Size: .2 MM Polyol/ Isocyanate Discharge Valve.

High Pressure Metering Pump 8 1/Min Axial Piston Pump: Open Circuit, Displacement:6 cm2
Rotational Speed, Max. 1800 RPM
Left Hand Wheel Adjustment: Flexible Range 1:10

Mode of Operation: Suction Mode
Viscosity: 20-30000 MPas
Pump and Motor Carrier with Magnetic Coupling
LP Pressure Transducer with Display Adequate for
Reactive Systems

High Pressure Meter Pump 8 1/Min
Axial Piston Pump: Open Circuit
Displacement: 6 cm3
Rotational Speed Max: 1800 RPM
Right Hand Wheel Adjustment: Flexible Range 1:10

2 Drive of Metering Pump 8V min FU with Frequency
Converter, 3-Phase Motor 5.5 kw
Rotational Speed: 1460 RPM
Voltage: 3 x 400- 440V, 50 Hz & 3 x 460-480V, 60 Hz.
Thermistor Sensor Design B5
Protection Category: IP55

Temperature Probe PT 100
High-Pressure Resistant, Probe Installed in Pipeline

2 Volumetric Flow Meter:
Gear Counter: VC 0.04
Viscosity Range (mPas): 10-300
Measuring Range (IMin) 10-1,0
High Pressure Filter (16S)
Mesh Size: 0.025 MM

2-Manual Testing with Two Valves (12L)
Operated by a Collective Actuating Shaft
One Check Valve is Placed in the Discharge Line

Mixing Head Hydraulic on Base Frame:
Tank Capacity: 100L
Feed Pump: 22 V Min-Max 200 Bar
High Pressure and Integrated Return Line Filter
Min. Oil Level Probe Pressure Accumulator 2, 8L 2-Pump 7.5 KW 480V VDF
2-Agitator .55W 480V Supply 120V Panel
1-Mixing Head Hydraulic Unit 480V Supply 120V Panel
1-Pendant Station, Mixing Head
1-Termianl Box, Mixing Head
1-Ethernet Witch and Modem Allow Remote Access for Troubleshooting. Requires Phone Coonection or
VPN Supplied by Customer.
1-Line Power 480V 100 Amp
1-CompacLogix Components
1-Push Buttons and Plugins for HMI
1-Main Control Panel 480V Supply 120V Panel Build
2-Temperature Control Components for 2-Electric Heaters or TCU.

1-Panel View Plus 6/700 Touch Screen
6-1/2" TFT Active Matrix Touch Screen
Resolution 600 x 480, 18-Bit Color Graphics Memory: 512MB

1-Pedestal
1-Air Conditioner Mounted in Door.
1-A through Panel Wall Air Conditioner will be Mounted in the Main Control Panel.