770 Ton, 176 Oz. Engel Duo Injection Molding Machine '09
Injection Molders 701 To 800 Ton
770 Ton, 176 Oz. Engel Duo Injection Molding Machine '09
| Year | 2009 |
| Tonnage | 770 |
| Shot Size | 176 |
| Platen Size | 59.40" x 56.70" |
| Tie Bar Spacing | 43.30" x 37.80" |
| Mold Height (Max) | 45.4" |
| Daylight | 17.7"(min)/80.8"(max) |
| Voltage | 460 |
| Core Pull | Yes |
| Control | CC200 |
Shot Size: 176 PS 135 HDPE oz.
Clamp: 2 Platen
176 PS 135 HDPE oz. Injection Unit
- Nozzle body with interchangeable tip, 3/4" radius and 1/4" orifice. Nozzle body-to-tip thread is
7/8"-14UNF-2B. Barrelhead-to-nozzle body thread is 1 3/4"-8UN-2A.
- Mechanical safety device for closing
- Standard electrical interface is 460V/3P/60hZ incoming voltage and 460V barrel heat with 120V
nozzle heat (see section "Electric:" for option other than standard.)
- Electrical equipment for USA
- ANSI B151.1 compliant
- Solid purge guard cover
- SPI mold and ejector pattern
- ERC robot interface
- Closed loop feed throat cooling control
- Ejector plate (if included) holes are counter bored through holes for " screws.
- Tool kit containing Allen and open end wrenches
- Emergency stop function bE10, not to open safety gate behind moving plate
- Core Pull single on movable platen
