2755 Ton, 481 Oz. Nissei Hybrid Injection Molding Machine '20
Injection Molders 901 Ton & Over
2755 Ton, 481 Oz. Nissei Hybrid Injection Molding Machine '20
| Year | 2020 |
| Tonnage | 2755 |
| Shot Size | 481 |
| Platen Size | 96.90" x 89.00" |
| Tie Bar Spacing | 72.00" x 64.20" |
| Mold Height (Min) | 31.5" |
| Mold Height (Max) | 63" |
| Daylight | 133.9" |
| Ejector Stroke | 13.7" |
| Clamp Stroke | 70.9"/102.4" |
| Screw Diameter | 160mm (6.3") |
| Voltage | 460/3/60 |
| Control | Tact IV |
Max Mold Weight Stationary: 30865 lbs. (14t)
Max Mold Weight Movable: 46297 lbs. (21t)
Plasticization Capacity: (PS) 1940.1 lbs./hr.
Max Injection Pressure: 17490 PSI
Injection rate: (cm3/s), 1731,c
Injection Velocity: (mm/s), 86
Screw Speed: 0-100 RPM
Pump Motor KW: 55kw x 5 +11kW
Heater Band Capacity: kW 113.45
481 Oz. Injection Unit
X Pump Hybrid Pump System
