| Year | 1998 |
| Tonnage | 55 |
| Shot Size | 2.7 |
| Platen Size | 18.10" x 18.10" |
| Tie Bar Spacing | 12.60" x 12.60" |
| Mold Height (Min) | 5.9" |
| Mold Height (Max) | 13.8" |
| Daylight (Max) | 23.62" |
| Ejector Stroke | 2.76" |
| Ejector Force | 2.2 Ton |
| Clamp Stroke | 9.84" |
| Screw Diameter | 1.02" |
| Voltage | 230 |
| LD Ratio | 20:1 |
| Control | Fanuc Series 16-I |
| Dimensions | 12'L x 3'W x 5'H |
| Weight | 5,500 Lbs. |
Screw Stroke: 3.74"
It has air blow feature added to allow air to blow during clamp lick up. This is Located under the controller and outfitted with an air regulator.
There is a manual grease pump used for the machine located under the clamping unit.
2.7 Oz. Injection Unit
Wired for Core-Pull
Robot Interface
