200-9 Nissei Vertical Injection Molding Machine '96
Injection Molders - Vertical Type
200-9 Nissei Vertical Injection Molding Machine '96
| Tonnage | 200 |
| Shot | 9 |
| Platen Size | 32.48" x 32.48" |
| Daylight (Max) | 29.53" |
| Mold Height (Min) | 13.8" |
| Ejector Stroke | 3.15" |
| Ejector Force | 4.35 Ton |
| Clamp Stroke | 15.75" |
| Injection Force | 33.7 Ton |
| Screw Stroke | 7.06" |
| Voltage | 460 |
| Control | NC9000G |
| Dimensions | 14'11" L x 6'4" W x 10'6"H / Machine Floor Space: 13'L x 5'5"W |
Injection Capacity: 255(PS) g/shot
Plasticizing Rate: 59 (PS) kg/hour
Injection Pressure: 2115 kg/cm (squared)
Injection Rate: 132 cm(cubed)/sec
Screw Speeds: 0-174 (low torque) 0-125 (high torque)
Nozzle Touch Force: 3.4 Tons
Parting Line: 7.8" x 11.8"
Distance Between Rods: 22.4" x 22.4"
Mold Open Force: 9.4 Tons
Max. Line Pressure: 140kg/cm (squared)
Pump-Elec Motor: 22kw/4 pole (30HP)
Heaters: 12.26 kw
Hydraulic Oil Req.: 171.7 Gallons
9 Oz. Injection Unit
Extra I/O For Robot Interface
Top Side Ejection
Special Core Pull
Spirex "A" Screw for Surlyn
RS232 Port
